Warning Light Operation; Turn Signal Indicator Lights; High Beam Indicator Light; Oil Pressure Warning Light - Hyundai Santa Fe 2002 Owner's Manual

Table of Contents

Advertisement

B260B01A-AAT
SRS (Airbag) Service
Reminder Indicator (SRI)
The SRS service reminder indicator (SRI)
comes on and flashes for about 6 seconds
after the ignition key is turned to the "ON"
position or after the engine is started, after
which it will go out.
This light also comes on when the SRS is not
working properly. If the SRI does not come on,
or continuously remains on after flashing for
about 6 seconds when you turned the ignition
key to the "ON" position or started the engine,
or if it comes on while driving, have the SRS
inspected by an authorized Hyundai Dealer.
B260D01A-AAT

Turn Signal Indicator Lights

The blinking green arrows on the instrument
panel show the direction indicated by the turn
signals. If the arrow comes on but does not
blink, blinks more rapidly than normal, or does
not illuminate at all, a malfunction in the turn
signal system is indicated. Your dealer should
be consulted for repairs.
B260E01A-AAT
Seat Belt Reminder Light
And Chime
The seat belt reminder light comes on for
about 6 seconds when the ignition key is
turned from the "OFF" position to "ON" or
"START". If the driver's seat belt is not fas-
1- 30
FEATURES OF YOUR HYUNDAI
tened, the warning chime will sound at the
same time.
B260F01A-AAT

High Beam Indicator Light

The high beam indicator light comes on when-
ever the headlights are switched to the high
beam or flash position.
B260G01A-AAT

Oil Pressure Warning Light

CAUTION:
If the oil pressure warning light stays on
while the engine is running, serious en-
gine damage may result. The oil pressure
warning light comes on whenever there is
insufficient oil pressure. In normal opera-
tion, it should come on when the ignition
switch is turned on, then go out when the
engine is started. If the oil pressure warn-
ing light stays on while the engine is run-
ning, there is a serious malfunction.
If this happens, stop the car as soon as it
is safe to do so, turn off the engine and
check the oil level. If the oil level is low, fill
the engine oil to the proper level and start
the engine again. If the light stays on with
the engine running, turn the engine off
immediately. In any instance where the oil
light stays on when the engine is running,
the engine should be checked by a Hyundai
dealer before the car is driven again.
B260H02A-AAT
Parking Brake/Brake Fluid Level
Warning Light
WARNING:
If you suspect brake trouble, have your
brakes checked by a Hyundai dealer as
soon as possible. Driving your car with a
problem in either the brake electrical sys-
tem or brake hydraulic system is danger-
ous, and could result in a serious injury or
death.

Warning Light Operation

The parking brake/brake fluid level warning
light should come on when the parking brake
is applied and the ignition switch is turned to
"ON" or "START". After the engine is started,
the light should go out when the parking brake
is released.
If the parking brake is not applied, the warning
light should come on when the ignition switch
is turned to "ON" or "START", then go out
when the engine starts. If the light comes on
at any other time, you should slow the vehicle
and bring it to a complete stop in a safe
location off the roadway.
The brake warning light indicates that the
brake fluid level in the brake master cylinder
is low and hydraulic brake fluid conforming to
DOT 3 or DOT 4 specifications should be
added. After adding fluid, if no other trouble is
found, the car should be immediately and
carefully driven to a Hyundai dealer for in-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents