Rear Seat; Folding Rear Seatback And Seat Cushion - Hyundai Santa Fe 2002 Owner's Manual

B080I01FC-GAT

REAR SEAT

Adjusting Seatback Angle
Seatback
folding lever
To recline the seatback, push the seatback
folding lever toward the headrest, and release
it after the desired seatback angle is achieved.
When you recline the seatback to desired
position, always be sure it has locked into
position.
CAUTION:
When reclining the seatback angle, you
should be adjust the seatback folding lever
with standing.
FEATURES OF YOUR HYUNDAI
B080A04O-AAT
Folding Rear Seatback and Seat
Cushion
For greater convenience, the entire seatback
and seat cushion may be folded down and up.
(1)
HSM288
1. Remove the headrests.
2. Pull strap to fold up the seat cushion.
3. Push and hold the seatback folding lever
(1) inward, then push down the seatback.
4. Hook the securing loop under the seat
cushion to the hanger on the backside of
the seatback.
Strap
NOTE:
Before folding the seatback, place the rear
seat belt buckles in the buckle clips on the
seatback. This will prevent the seat belt
buckles from becoming covered by the
B080D01O
seat cushion when it is returned to the
seating position.
Buckle clips
HSM293
Securing loop
Hanger
B080D02O
1- 11