Tachometer; Combination Turn Signal, Headlight And High-Beam Switch; Turn Signal Operation; Lane Change Signal - Hyundai Santa Fe 2002 Owner's Manual

Table of Contents

Advertisement

To shift from TRIP A to TRIP B, press the
reset switch. When pressed for 2 seconds, it
will reset to 0.
B330A01Y-AAT

TACHOMETER

The tachometer registers the speed of your
engine in revolutions per minute (rpm). It is
useful to help you shift at the appropriate
engine speed to avoid lugging or over-revving
the engine.
CAUTION:
The engine should not be raced to such a
speed that the needle enters the red zone
on the tachometer face. This can cause
severe engine damage and may void your
warranty.
1- 34
FEATURES OF YOUR HYUNDAI
B340A01A-AAT
COMBINATION TURN SIGNAL,
HEADLIGHT AND HIGH-BEAM
SWITCH

Turn Signal Operation

Pulling down on the lever causes the turn
signals on the left side of the car to blink.
Pushing upwards on the lever causes the turn
signals on the right side of the car to blink. As
the turn is completed, the lever will automati-
cally return to the center position and turn off
the turn signals at the same time. If either turn
signal indicator light blinks more rapidly than
usual, goes on but does not blink, or does not
go on at all, there is a malfunction in the
system. Check for a burned-out fuse or bulb
or see your Hyundai dealer.
B330A01O
B340B01A-AAT

Lane Change Signal

To indicate a lane change, move the lever up
or down to a point where it begins flashing.
The lever will automatically return to the cen-
ter position when released.
B340C02L-AAT
Headlight Switch
To operate the headlights, turn the barrel on
the end of the multi-function switch. The first
position turns on the parking lights, sidelights,
tail lights and instrument panel lights. The
second position turns on the headlights.
Parking light auto cut
If you do not turn the parking lights "OFF"
after driving, the parking lights will automati-
cally shut "OFF" when the driver's door is
opened.
HSM286
To turn them "ON" again, you must simply
turn the ignition key to the "ON" position.
HSM284

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents