Panasonic VL-G201 Installation And Operation Manual page 23

6
Connect the power cable to the DC terminal, the power cord to the AC adaptor, then
connect the power cord to the AC outlet (100 V
L Be sure to connect the power cable to the 2 holes on the left side of the DC terminal.
L For details on how to attach the power cable, see page 26.
DC terminal
Power cable
7
Attach the DC cord to the clamp on the rear of the DC terminal.
L This will help to avoid the DC cord to disconnect from the DC terminal.
–
AC adaptor
1
DC terminal
Clamp
Introduction and Installation
240 V, 50 Hz / 60 Hz).
Power cord
3
To AC outlet
2
DC cord
23