Panasonic VL-G201 Installation And Operation Manual page 26

Introduction and Installation
To attach the power cable
Monitor station
L While pressing on the button with a pointed object such as a screwdriver, insert the power
cable into the terminal.
L To disconnect the power cable, press on the button while pulling out.
L To attach an optional power cable, cut off about 12 mm of the cable cover (1), then push
in firmly until the end of the cable is securely inserted into the power connection terminal
(2).
1
12 mm
To attach the wires
Button
L Strip off of the wire cover so that about 9 mm of the wire is exposed.
L While pressing on the button with a pointed object such as a screwdriver, insert the wire into
the terminal connector.
L To disconnect a wire, press on the button while pulling out.
26
Button
Terminal connector
Terminal connector
DC terminal
Button
Terminal
connector
2 Power cable cross section
Correct Incorrect