Opening The Housing - Siemens SICAM TM Installation Manual

Wiring Communication
4.2.1.

Opening the Housing

First the dust protection cap must be removed from the D-Sub connector (X2)
screws removed marked with Point
carefully bending it away from the front side of the housing
mounting with a push to the rear
and one can begin with the installation of the SIMs.
1
5
44
‚
. Then the red plastic side panel can be removed by
„
. Now the back panel of the housing
4
2

and the
ƒ
and detaching it from the
…
can be removed
3
SICAM TM, Installation
Edition 10.2014, DC6-015-2.04