Installation Of Bus Interface Modules; Optical Ax Bus - Siemens SICAM TM Installation Manual

3.6.

Installation of Bus Interface Modules

3.6.1.

Optical Ax Bus

The optical Ax Bus Interface Module can be installed on the TS35 rail by hand, without any
tools.
To do this, the module is engaged in a slanted position with the carrier rail retainer in the
upper edge of the TS35 rail
has contact with the lower edge of the rail
opens a little
4
SICAM TM, Installation
DC6-015-2.04, Edition 10.2014
CM-0842 Ax 1703-Businterface 4x
fiber optical

. One then turns the housing until the carrier rail retainer also
„
and the housing snaps into the guide.
3
Designation
‚.
By pressing on the housing
2
Assembly
Item Number/ MLFB
GA0-842
6MF11110AJ420AA0
ƒ
the retainer
1
35