Siemens SICAM TM Installation Manual page 121

Start now SICAMOSS.exe. During the readout process you can see a DOS-window. If the line
note: All files processed is displayed you can close the DOS-window by pressing
any key.
Now you can find on the SD-card the folder OSS with several subfolders. One single folder for
each firmware which uses open source components. Within these subfolders are again folders
for each used firmware revision. These folders contain the corresponding license data.
Path for ReadmeOSS:
SD-Card:\OSS\<Firmwarename>\<Firmwarenumber>\<Revision>\ReadmOSS.htm.
E.g.: SD-Card:\OSS\ETA4\02.01\ReadmOSS.htm
Example of a ReadmOSS.htm:
SICAM TM, Installation
DC6-015-2.04, Edition 10.2014
Licensing Agreement
121