Dcf77 Receiver - Siemens SICAM TM Installation Manual

Wiring for the Reception of Time Signals
5.1.

DCF77 Receiver

The DCF77 receiver is designed for the installation on a TS35 rail and can be slotted directly
on to the master control element (X2) via the 9-pin DSUB-connector.
Via this plug-in connection the module is supplied with 5V and a minute pulse is transmitted to
the CP-6014 for the synchronization.
In addition there is a 2-pole screw terminal (X11 SYNC) available over which, according to
requirements, the minute pulse or a serial time signal can be transmitted.
DCF77 Road antenna
Lightning
protection
Accessories see Appendix A,
62
DCF77- Receiver
N connector
RG58
BNC-Connector RG58
DCF77- Receiver for DIN rail
Recommended and tested purchased products
Master control element CP-6014
Designation
GA0-806
6MF11110AJ060AA0
Edition 10.2014, DC6-015-2.04
1 2 3 4 5 6
X11 SYNC
Item Number/ MLFB
SICAM TM, Installation