Advertisement
The wing fillets fit perfectly on the wing. Attaching the fillets is pretty easy and only require a little effort. Silicone makes
a good medium for attaching the fillets, this allows plenty of time to get the alignment to your liking before the silicone
sets. Hold in place with masking tape while everything goes off!
(As an alternative to the plywood servo mount, you could
also use a JR single servo side mount (#07-04). These
items are pretty cheap and can be attached with some
3mm screws and nylock nuts. Most hobby stores will keep
these items. The same measuring process as with the ply
mounts applies. Work toward keeping the servo output
shaft as close as possible to the centre of the hatch slot.)
Sukhoi SU 31—2.75m/2.6m
Page|15
Advertisement
