Clear Commands - Cisco Catalyst 4500 Series Configuration Manual

Chapter 61 Configuring NetFlow-lite
The following example shows how to display information about a particular packet and per monitor stats
on a VLAN:
Switch# show netflow-lite monitor 1 vlan 2
VlanID-2:
Netflow-lite
Statistics:
The following example shows how to display the total number of export packets sent:
Switch# show netflow-lite
Netflow-lite
Description:
Network Protocol Configuration:
Transport Protocol Configuration:
Export Protocol Configuration:
Exporter Statistics:

Clear Commands

To clear statistics of a packet sampler at a monitor, use the following commands, as needed:
Command
Switch# clear netflow-lite monitor monitor_id
statistics interface interface name
Switch# clear netflow-lite monitor monitor_id
statistics vlan vlan_id
Switch# clear netflow-lite exporter exporter_
name statistics
OL-25340-01
Average Packet Size observed: 64
Average Packet Size used: 64
Monitor-1:
Active: TRUE
Sampler: sampler1
Exporter: exporter1
Average Packet Size: 0
Packets exported: 0
Packets observed: 0
Packets dropped: 0
Average Packet Size observed: 64
Average Packet Size used: 64
Exporter e1:
Destination IP address:
VRF label:
Source IP Address:
DSCP:
TTL:
COS:
Transport Protocol:
Destination Port:
Source Port:
Export Protocol:
Export packets sent:
e1
Exporter
192.168.1.1
cisc
10.1.1.5
0x1
30
1
UDP
1234
65535
netflow-v9
36
Purpose
Clear the statistics of a packet sampler at a
datasource
Clear the collector statistics
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
Clear Commands
61-9