Cisco Catalyst 4500 Series Configuration Manual page 1412

Configuring Ethernet CFM
Command
Step 7
Switch# ethernet cfm mep crosscheck
}
disable domain domain-name {vlan
any} | port}
Step 8
Switch# show ethernet cfm maintenance-points
remote crosscheck
Step 9
Switch# show ethernet cfm errors
[configuration]
Step 10
Switch# copy running-config startup-config
Use the no form of each command to remove a configuration or to return to the default settings.
The following example illustrates how to configure Ethernet CFM crosscheck:
Switch(config)# ethernet cfm mep crosscheck start-delay 60
Switch(config)# ethernet cfm domain abc level 3
Switch(config-ecfm)# service test vlan 5
Switch(config-ecfm-srv)# mep mpid 23
Switch(config-ecfm-srv)# mep mpid 34
Switch(config-ecfm-srv)# end
Switch# ethernet cfm mep crosscheck enable domain abc vlan 5
Switch# show ethernet cfm maintenance-points remote crosscheck
-------------------------------------------------------------------------
MPID Domain Name
-------------------------------------------------------------------------
23 abc
34 abc
Switch# show ethernet cfm errors
--------------------------------------------------------------------------------
MPID Domain Id
--------------------------------------------------------------------------------
34
23
Switch#
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
63-12
{
enable
{
vlan-id
MA Name
test
test
MA Name
abc
test
abc
test
Chapter 63
Purpose
|
• Enable or disable CFM crosscheck for one or more
|
VLANs or a port MEP in the domain.
• domain domain-name—Specify the name of the
created domain.
• vlan {vlan-id | any}—Enter the service provider
VLAN ID or IDs as a VLAN-ID (1 to 4094), a range of
VLAN-IDs separated by a hyphen, or a series of
VLAN IDs separated by comma. Enter any for any
VLAN.
port—Identify a port MEP
•
Verifies the configuration.
Enter this command after you enable CFM crosscheck to
display the results of the crosscheck operation. Enter the
configuration keyword to display the configuration error
list.
(Optional) Saves your entries in the configuration file.
Lvl Type Id
3 Vlan 5
3 Vlan 5
Mac Address
Reason
0000.0000.0000
RMEP missing
0000.0000.0000
RMEP missing
Configuring Ethernet OAM and CFM
Mep-Up
No
No
Type Id
Lvl Age
Vlan 5
3 95s
Vlan 5
3 95s
OL-25340-01