About Rmon - Cisco Catalyst 4500 Series Configuration Manual

Configuring RMON
This chapter describes how to configure Remote Network Monitoring (RMON) on your Catalyst 4500
series switch. RMON is a standard monitoring specification that defines a set of statistics and functions
that can be exchanged between RMON-compliant console systems and network probes. RMON provides
you with comprehensive network-fault diagnosis, planning, and performance-tuning information.
This chapter consists of these sections:
•
•
•
For complete syntax and usage information for the switch commands used in this chapter, first look at
Note
the Cisco Catalyst 4500 Series Switch Command Reference and related publications at this location:
http://www.cisco.com/en/US/products//hw/switches/ps4324/index.html
If the command is not found in the Catalyst 4500 Series Switch Command Reference, it will be found in
the larger Cisco IOS library. Refer to the Catalyst 4500 Series Switch Cisco IOS Command Reference
and related publications at this location:
http://www.cisco.com/en/US/products/ps6350/index.html

About RMON

RMON is an Internet Engineering Task Force (IETF) standard monitoring specification that allows
various network agents and console systems to exchange network monitoring data. You can use the
RMON feature with the Simple Network Management Protocol (SNMP) agent in the switch to monitor
all the traffic flowing among switches on all connected LAN segments.
OL-25340-01
About RMON, page 67-1
Configuring RMON, page 67-3
Displaying RMON Status, page 67-6
C H A P T E R
Software Configuration Guide—Release IOS XE 3.3.0SG and IOS 15.1(1)SG
67
67-1