Conditions Used For Flange Strength Calculations - Emerson Rosemount 3308A Reference Manual

Reference Manual
00809-0100-4308, Rev BB
A.1.7 Conditions used for flange strength calculations
Table A-5. 316 SST or Process Connection with Strength Calculations
Standard Bolting material
ASME/ANSI Stainless steel SA193 B8M Class 2
EN, JIS EN 1515-1/-2 group 13E0, A4-70
Table A-6. Alloy C-276
Standard Bolting material
ASME/ANSI
UNS N10276
EN, JIS
Table A-7. Duplex 2205
Standard Bolting material
ASME/ANSI A193 B7 or A320 L7
EN, JIS Bumax 88
110
Gasket Flange material
Soft (1a) with min.
thickness 1.6 mm
Stainless steel A182 Gr. F316L
and EN 10222-5-1.4404
Soft (EN 1514-1) with
min. thickness 1.6 mm
Gasket Flange material
Soft (1a) with min.
SB462 Gr. N10276 (solution
thickness 1.6 mm
annealed condition) or
SB575 Gr. N10276 (solution
Soft (EN 1514-1) with
annealed condition)
min. thickness 1.6 mm
Gasket Flange material
Soft (1a) with min. Duplex stainless steel
thickness 1.6 mm SA/A182 F51 and
EN10222-5-1.4462
Soft (EN 1514-1) with
or SA/A240 Gr. S31803 and
min. thickness 1.6 mm
EN10028-7-1.4462
Specifications and Reference Data
Hub material
Stainless steel SA479M
316L and
EN 10272-1.4404
Hub material
SB574 Gr. N10276
Hub material
Stainless steel SA479M
S31803 and
EN, JIS Bumax 88 EN
10272-1.4462
Specifications and Reference Data
October 2016