Manual Setup - Device - Emerson Rosemount 3308A Reference Manual

Reference Manual
00809-0100-4308, Rev BB
Typical Interface
Condition
D.3.2

Manual Setup - Device

Wireless - Network
Network ID
Join Key
Wireless - Broadcasting
Message Content
Message Variables
Trigger Mode
Trigger Level
First and Trigger
Variable
Triggered Update Rate
Default Update Rate
162
The typical interface condition in the tank.
Select one of the following conditions:
Typical Interface Description
Condition
Unknown or Other The typical interface condition is unknown, or
condition varies in such a way that no typical interface
condition can be stated.
Layer on top (thin) The interface thickness is typically thin
compared to the bottom layer. The tank mostly
contains the bottom product.
Layer at the The interface thickness is typically thick
bottom (thin) compared to the bottom layer. The tank mostly
contains the upper product.
Identification number that tells the device which network it belongs to.
Obtained from the network administrator.
A kind of password that the device uses to join the network. Obtained
from the network administrator. All sections must contain the same
number of characters.
Which content (HART command) to broadcast for a message.
Which variables that are included in the content.
How message will be triggered.
At which level message will be triggered.
The 1st variable contained within message which also will be used to
trigger a broadcast.
This defines how often the broadcast message is sent to the gateway after
a user defined trigger level threshold has been crossed. Faster update rates
have an impact on the total communications traffic on the network, and
power module life.
This defines how often the broadcast message is sent to the gateway.
Faster update rates have an impact on the total communications traffic on
the network, and power module life.
Configuration Parameters
October 2016
Configuration Parameters