Reference Manual
00809-0100-4308, Rev BB
3.6
Mount device on tank
Mount the transmitter with flange on a nozzle on top of the tank. The transmitter can also be mounted
on a threaded connection. Make sure only qualified personnel perform the installation.
Note
If the transmitter head must be removed from the probe, make sure that the Process seal is carefully
protected from dust and water. See
information.
Note
PTFE covered probes must be handled carefully to prevent damage to the coating.
3.6.1
Threaded tank connection
Figure 3-16. Threaded Tank Connection
A. Transmitter head
B. Nut
C. Adapter
Installation
A
B
C
E
D
F
"Transmitter head replacement" on page 103
D. Probe
E.
Sealant on threads (NPT) or Gasket (BSP/G)
F.
Tank flange/Process connection
Installation
October 2016
for further
33