Channel Display Mode (Mr); Fm Frequency Display Mode (Fm Vfo); Fm Channel Save; Fm Channel Display Mode (Mr) - Vertex Standard VZ-88 Operating Manual

Channel Display Mode (MR)

The VZ-88 radio has 128 channels. The left bottom
side of the LCD displays "CH" and the current channel
number. The RX frequency or channel name is
displayed which is selected by pressing "F"+"7MODE"
keys. The icons such as "
" "，scan add " "，repeater " " indicate related
settings for the current channel.
Pressing "▲"/"▼" to change channel number
consequently. Either, channel can be directly selected
by entering the channel numbers.

FM Frequency Display Mode (FM VFO)

When FM is enabled, icon"
can be adjusted by pressing "▲" /"▼" key with 100KHz
per step, or directly by entering frequency numbers
from numeric keypad.
Note: FM Receiving frequency is from 87-108MHz.

FM Channel Save

To save current FM frequency into a FM channel,
press the " F" butt o n, then icon " " & FM channel
number blinks. Press "▲" / "▼" key to select the
channel number to save to, then press "V/M" key to
confirm the settings. Press "PTT" to exit this status. A
maximum of 25 FM channels can be set.
" / " ", high power
"shows. The frequency

FM Channel Display Mode (MR)

Press "V/M" key to switch the FM VFO/MR mode. In
MR mode the LCD (left bottom) displays the FM
channel number 01 to 25. Use "▲/▼" key to change
FM channel or enter wanted channel number from
keypad directly.

Short Cut Key

Press the "F" key, when "
button to do a short cut operation, refer to chapter
"Short Cut Key".
Menu Selection Mode（MENU）
Press "F" key, then icon "
Press "9" key to select menu. In this mode, you may
select items by using "▲/▼" key, refer to Chapter 7.

Keypad Lock or Unlock

Press and hold the "F" key for 2s to lock the keypad,
the LCD displays " " icon. Press and hold the "F" key
for 2s again to unlock the keypad.
Communication Requirement
When talking to each other, the 2 radios TX/RX
frequency, PL/DPL should match, means the TX
frequency and PL/DPL should be the same as the RX
frequency and PL/DPL. It is suggested the TX/RX is
" blinks then press digit
" blinks in the display.
19