EMERGENCY AND BREAKDOWN ASSISTANCE
Bulb Replacement
Open the bonnet to access the head-
lamps.
WARNING
The engine should not be running
when changing bulbs.
If the engine has been running just
prior to replacing bulbs in the
headlight housing, please keep in
mind that components in the en-
gine compartment will be hot.
98
Replacing - High / Low beam bulb
Remove the rubber press fit cover
1.
by simply pulling it off.
Press the pin and pull the connector
2.
from the bulb.
To free the headlamp bulb from the
3.
socket, press and swing the retaining
spring and pull it straight back.
Pull out the bulb from the socket.
4.