Table of Contents
Advertisement
Start the engine of the vehicle with
the discharged battery.
Before disconnecting the jumper ca-
bles, let the engine run for several
minutes.
If the booster battery you are using is
fitted to another vehicle, start the en-
gine of the vehicle with the booster
battery. Run the engine at moderate
speed.
Remove the jump leads in the exact
reverse order in which you connected
them.
NOTE
Do not disconnect the discharged
battery from the vehicle.
WARNING
Never connect the jump lead di-
rectly to the negative (–) terminal
of the discharged battery. This may
lead to an explosion.
EMERGENCY AND BREAKDOWN ASSISTANCE
WARNING
Do not allow battery electrolyte to
come in contact with eyes, skin,
fabrics or painted surfaces. The
fluid contains acid which can
cause injury and severe damage.
Wear protective apparel. Do not in-
hale any battery gases. Keep chil-
dren away from batteries. In case if
battery acid comes in contact with
the skin, wash it off immediately
with water and seek medical atten-
tion.
During charging and jump-starting,
explosive gases can escape from
the battery. There is a risk of an ex-
plosion. Particularly avoid fire,
open flames, creating sparks and
smoking. Ensure there is sufficient
ventilation while charging and
jump-starting. Do not lean over the
battery.
Make sure that the positive termi-
nal of a connected battery does not
come into contact with vehicle
parts. Never place metal objects or
tools on a battery.
It is important that you observe the
described order of the battery ter-
minals when connecting and dis-
connecting a battery. If you are in
doubt, seek assistance from quali-
fied specialist workshop.
Never connect or disconnect the
battery terminals while the engine
is running.
89
Hide quick links:
Advertisement
Table of Contents
