TATA Motors TIAGO Owner's Manual page 114

Tyre pressure sticker location Special care for tubeless tyres:
 While removing tyre from wheel rim
and mounting it back on wheel rim,
take precautions not to damage tyre
bead. Use tyre removal and assem-
bly machines. Damage or cut on tyre
bead may cause gradual loss of air
and deflation of tyre.
 Do not scratch inside of tubeless tyre
with metallic or sharp object. Tube-
less tyres are coated with impermea-
ble layer of rubber from inside which
holds the air inside the tyre. Removal
of this layer due to scratching may
cause gradual loss of air and defla-
tion.
 If wheel rim gets damaged in service,
get the wheel rim repaired/ replaced
immediately. Running the vehicle
with damaged rim may cause defla-
tion of tyre and subsequent dislodg-
ing of tyre from rim.
MAINTENANCE
 Maintain
recommended
pressure. Over-inflation, in particu-
lar, may cause puncture or bursting
of tyre.
NOTE
Life and wear pattern of tyres de-
pends on various parameters like
tyre pressure, wheel alignment,
wheel balancing, tyre rotation, etc.
It also largely depends on vehicle
speed, load carried, usage, driving
habits, road conditions, tyre qual-
ity, etc. In case fault is suspected
to be due to poor quality of tyres,
the same may be taken up with
concerned tyre manufacturer.
inflation
113