Fuel Specification - TATA Motors TIAGO Owner's Manual

Fuel Specification

Fuel (Diesel)
Normal grade BS IV compliant diesel conforming to IS1460
or EN 590 or equivalent is recommended to be used as fuel.
Do not use premium diesel available in the market for exam-
ple extra premium / Turbojet etc.
Recommended fuel specifications
Parameter
Cetane Number (min)
Sulphur content
Lubricity (HFRR)
Where oxidation catalytic converter is fitted, it is manda-
tory to use Diesel fuel with sulphur contents as given
above. Use of any other diesel fuel can increase the pol-
lutants.
At very low temperature, fluidity of diesel may become insuffi-
cient due to paraffin separation. It is therefore necessary to
mix supplementary fuel with summer or winter grade diesel.
Unit BS IV
C N 51
mg/kg
50
micron
460
NOTE
The supplementary fuel to be used like kerosene. Ratio for mix-
ing of supplementary fuel and diesel are shown in the table.
Ambient Tempera-
ture up to Deg C.
Summer grade die-
Up to 0
0 to -10
-10 to -15
Care should be taken that diesel and supplementary fuel are
thoroughly mixed before filling.
Ambient Tempera-
ture upto Deg C.
Winter grade diesel
Up to -15
-15 to -20
-20 and below
WARNING
Do not mix gasoline or alcohol with diesel. This mixture
can cause an explosion.
TEHCNICAL INFORMATION
Percentage
Supplementary
sel
fuel
100
70
50
Percentage
Supplementary
fuel
100
70
50
0
30
50
0
30
50
125