Analog Terminal Adapter (Ata) - Nortel m3900 series User Manual

78 Installation
Table 17
Compatibility of accessories (cont'd.)
Display Expansion Module
Full Duplex Handsfree
Note: FDHF is compatible with the MEARI; however, you cannot use FDHF when a recording
device is connected.

Analog Terminal Adapter (ATA)

Procedure 11 "Install the ATA" (page 78)
the ATA with your M3900 series set.
The ATA allows an off-the-shelf analog device (FAX, modem, or analog
telephone (500/2500)) to work simultaneously with your M3902, M3903,
M3904, or M3905 Meridian Digital Telephone. The M3901 set does not
support the ATA.
Install the ACM into your M3900 Series set (see
the ATA" (page
connection capabilities between the M3902, M3903, M3904, and M3905
telephones and the ATA.
Procedure 11
Install the ATA
Step
1
2
3
4
5
Copyright © 2008 Nortel Networks
.
ATA
No
78)), before you install your ATA. The ACM provides
Action
Insert the ATA accessory cartridge into the ACM. The latch
should be at the top.
Connect the commercial device you have selected to use, either
your FAX machine, modem, or analog (500/2500) telephone, to
the connection on your ATA cartridge interface.
Plug the transformer into the electrical outlet (use only the
transformer designed for your ACM accessories).
The wall transformer for M3900 accessories is NTMN80AA (CPC
A0779713) 110V Wall Transformer (M3900 series). It attaches
between the telephone line cord and the telephone walljack.
Connect the Adapter plug, attached to your transformer, into the
wall jack.
Connect the six-conductor line cord from the telephone to the
Adapter jack attached to your ACM accessory transformer.
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
PC
KBA Utility MEARI
No
(see
note)
describes how to install and use
DBA FDHF
Procedure 11 "Install