Installing The Acm Into The Footstand - Nortel m3900 series User Manual

76 Installation
5
6
7
8
9
10
11
12

Installing the ACM into the footstand

There is a cut out on the base of the footstand which displays the
ACM connector ports. When ready to attach an accessory, insert the
appropriate cartridge into the port slot. There is one accessory port
available on the M3902. There are two accessory ports available on the
M3903, M3904, and M3905.
The accessories you attach to the telephone must be compatible.
"Compatibility of accessories" (page 77)
You require a wall transformer to power accessory cartridges.
The transformer does not come with the ACM unit. Contact your
Nortel representative to order the ACM compatible wall transformer
(NTMN80AA).
Figure 10 "ACM Module" (page 77)
the telephone footstand.
Copyright © 2008 Nortel Networks
.
Snap the ACM into the rectangular opening in the telephone
footstand.
Plug the ACM cable connector into the back of the telephone.
Place the ACM attached ribbon cable into the track running down
the telephone base.
Snap the plastic cable cover in place over the ACM ribbon cable.
Connect the line cord into the base of the telephone.
Connect the hinges to the telephone base and swing the
footstand back in place.
Snap the footstand into a fixed position.
Return the telephone to its original position.
Nortel Communication Server 2100
M3900 Series Meridian Digital Telephones User Guide
NN42200-110 09.01 Standard
20 August 2008
--End--
shows accessory compatibility.
shows the installation of the ACM into
Table 17