Connect A Powerline Adapter To Your Router; Add Adapters To Your Network - TRENDnet TPL-410AP User Manual

Wifi everywhere powerline 500av
Hide thumbs Also See for TPL-410AP:
Table of Contents

Advertisement

 
TRENDnet User's Guide
 
Connect a Powerline adapter to your router 
 
1. Plug the Powerline adapter into an available wall power outlet near your router. 
Note: This will allow devices connected to your Powerline network to access the Internet 
and other devices connected to your network. 
 
2. Connect the included Ethernet cable (also called network cable) from the Ethernet 
port (also called network port) of your Powerline adapter to an available Ethernet port 
(also called LAN port) on your router. 
 
3. Once the Powerline adapter is installed and connected to your router, verify that the 
Power LED is on or blinking and the Ethernet LED is on or blinking. 
 
© Copyright 2016 TRENDnet. All Rights Reserved. 
 
 
 
Add adapters to your network 
 
Once you have installed and connected the first Powerline adapter to your router, you 
can easily extend your network to other rooms by adding additional Powerline adapters. 
 
To extend your network using an additional Powerline adapter: 
 
1. First, make sure the first Powerline adapter is installed and connected to your router. 
Note: This will allow devices connected to your Powerline network to access the Internet 
and other devices connected to your network.  
 
2. Plug the additional Powerline adapter into an available wall power outlet in another 
room near a computer or network device (e.g. game consoles, network‐enabled TVs, 
network attached storage, network media server/players, etc.) that you would like to 
connect to your network. 
 
3. Connect the included Ethernet cable from the Ethernet port on your Powerline 
adapter to the to the Ethernet port of your computers or network devices. 
 
4. After the additional Powerline adapter is connected and installed to your computer or 
network device, wait for the DATA LED to turn on. After the DATA LED turns on, verify 
that the Power LED is on, the DATA LED is on or blinking, and the Ethernet LED is on or 
blinking. 
 
Note: To verify that your Powerline adapters are connected successfully to your network, 
you can check if the computer(s) or network device(s) can access the Internet through 
your Powerline network. 
 
 
To install additional Powerline adapters in other rooms, repeat the steps above for 
each adapter. 
 
 
TPL‐410AP / TPL‐410APK 
 
 
 
 
 
 
  
 
 
18 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tpl-410apk

Table of Contents