Tpl-406E - TRENDnet TPL-410AP User Manual

TRENDnet User's Guide
Power Prongs
LED Color Sequence
Green Solid
Power Green Blinking
N/A Off
Green Blinking
WLAN
N/A Off
Solid
Green
Blinking
Solid
DATA
Amber
(Powerline)
Blinking
Solid
Red
Blinking
N/A Off
Solid
LAN Ports 1‐2
Green
(Ethernet
Blinking
Connection)
N/A Off
© Copyright 2016 TRENDnet. All Rights Reserved.
Definition
Device powered on
WPS is activated
Device powered off
Wireless enabled, data transmitting/receiving
Wireless disabled
Powerline connected (Connection quality is Best)
Syncing or Powerline data transmitting/receiving
(Connection quality is Best)
Powerline connected (Connection quality is Better)
Powerline data transmitting/receiving (Connection
quality is Better)
Powerline connected (Connection quality is Good)
Powerline data transmitting/receiving (Connection
quality is Good)
Powerline is not synced or connected
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) connected
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) data transmitting/receiving
Port disconnected/no Ethernet link
TPL‐406E
Important Note: Please note that the TPL‐406E powerline adapter will only be
included when purchasing the Powerline 500 Wireless Kit, model TPL‐410APK.
Front View
Button Action Function
Initiate Link/Connection and generate random
network name/key (DATA LED will go off then
Link
return to solid after connection is made).
Link /
Push
Note: The secondary or additional Powerline
Reset
adapter's Link button must also be pushed within 2
then release
(see the
minutes (120 sec) of pushing the Link button on the
section
first adapter in order to establish connectivity.
Using the
Sync Button
Reset
for
Reset device to factory defaults (All LEDs will turn
instructions)
Push/Hold for 10 off and turn back on).
seconds,
Note: Will reset to the factory default private
then release network name "HomePlug AV".
TPL‐410AP / TPL‐410APK
POWER LED
ETHERNET LED
DATA LED
Network Port
Link/Reset Button
3