TRENDnet TPL-410AP User Manual page 25

TRENDnet User's Guide
In MAC 10.4, from the Configure IPv4, drop‐down list, select Using
DHCP and click the Apply Now button.
In MAC 10.5, from the Configure drop‐down list, select Using DHCP
and click the Apply button.
In MAC 10.6, from the Configure drop‐down list, select Using DHCP
and click the Apply button.
f. Restart your computer.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
How to configure your network settings to use a static IP address?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Windows® 7/8/8.1
a. Go into the Control Panel, click Network and Sharing Center.
b. Click Change Adapter Settings, right‐click the Local Area Connection icon.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Use the following IP address, and assign your network adapter a
static IP address. Click OK
Windows® Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right‐click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Use the following IP address, and assign your network adapter a
static IP address. Click OK
Windows® XP/2000
a. Go into the Control Panel, double‐click the Network Connections icon
b. Right‐click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
© Copyright 2016 TRENDnet. All Rights Reserved.
d. Then click Use the following IP address, and assign your network adapter a
static IP address. Click OK
MAC OS® 10.4/10.5/10.6
a. From the Apple, drop‐down list, select System Preferences.
b. Click the Network icon.
c. From the Location drop‐down list, select Automatic.
d. Select and view your Ethernet connection.
How to find your MAC address?
In Windows 2000/XP/Vista/7/8,
Your computer MAC addresses are also displayed in this window, however, you can type
getmac –v to display the MAC addresses only.
In MAC OS 10.4,
1. Apple Menu > System Preferences > Network
2. From the Show menu, select Built‐in Ethernet.
3. On the Ethernet tab, the Ethernet ID is your MAC Address.
In MAC OS 10.5/10.6,
1. Apple Menu > System Preferences > Network
2. Select Ethernet from the list on the left.
3. Click the Advanced button.
3. On the Ethernet tab, the Ethernet ID is your MAC Address.
TPL‐410AP / TPL‐410APK
23