Home
|
Preface
Jumpers & Switches
Removal and Replacement
Removing the Hard Drive
Removing the Hard Drive
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
|
Product Description
Removal & Replacement
|
Specifications
|
Troubleshooting
|
Connector Pins
|
Illustrated Parts
|
Power Cord Requirements
1.
Perform the preparation
procedures.
2.
Remove the hood.
3.
Move the air baffle out of
the way.
4.
Disconnect the power
and signal cables.
5.
Remove the drive cage
from the chassis.
6. Remove the two screws
on the side of the drive
cage, and slide the hard
drive out of the front of
the drive cage.
End of sequence. To replace
the hard drive, reverse this
procedure.
Return to Removing Mass
Storage.
|