Compaq Presario 2510 Maintenance & Service Manual page 43

Home | Preface
Jumpers & Switches
Removal and Replacement
Removing the Right Speaker
Removing the Right Speaker
Maintenance & Service Guide
Presario 2250 Series
2510, 2410 ES & 4240 ES Personal Computers
| Product Description
Removal & Replacement
| Specifications
| Troubleshooting
| Connector Pins
| Illustrated Parts
| Power Cord Requirements
Perform the
1.
preparation
procedures.
Remove the hood.
2.
Move the air baffle
3.
out of the way.
Remove the drive
4.
cage from the
chassis.
Remove the front
5.
bezel.
Disconnect the
6.
speaker cables from
the system board.
7. Remove the four
screws from the rear
of the right speaker
and separate the
speaker from the
chassis.
Right speaker and
NOTE: enclosure are one
assembly.
Next step
|