Denco CAIRplus Operation Manual page 37

CAIRplus
Centrally-split roof panels
2
Fig. 5-30: Centrally-split roof panels
Consider the following for side-by-side units with misalignment, sizes 128.xxx and 160.xxx
1
Fig. 5-31: Side-by-side units with offset,
sizes 128.xxx and 160.xxx
PR-2009-0096-GB • Subject to modifications • R8-10/2015
•
With centrally-split roof panels slide the separately provided
1
roof joint strips (1) over the flanges.
•
Secure in place a terminating angle plate (2) on each front
wall.
•
Apply sealant (3) as presented in the figure.
•
Attach the separately provided weatherproof covers (4) and
use supplied screws to secure them in place.
4
3
•
Depending on the unit shipping splits, install a separately en-
closed roof panel for „side-by-side casing" (1), if necessary,
as presented in the drawing.
Assembly
37