Assembly
Additional measure for double-deck and side-by-side units
Fig. 5-21:
Connecting unit sections
Fig. 5-22:
Double-deck units
Fig. 5-23:
Side-by-side units
Additional measure for units in hygiene design
Fig. 5-24:
Joint seams
32
•
Connect both unit sections using supplied plates.
•
For offset double-deck units, use the screws as outlined.
•
For offset side-by-side units, use the screws as outlined.
•
Clean and seal internal joint seams at the bottom. The sealant is included in the
packaged content for hygiene units.
PR-2009-0096-GB • Subject to modifications • R8-10/2015
CAIRplus