5.2. Verify Station Configuration
It is assumed all Avaya endpoints have already been configured. The stations used for the
Grandstream endpoints do not need to be configured via the SAT. Rather, stations will be
automatically created in Communication Manager when the SIP Users are added in Section 6.1.
After completing the steps in Section 6.1 to create a SIP User, enter the "display station"
command within the SAT to verify that station was successfully added to Communication
Manager.
MJH; Reviewed:
SPOC 4/15/2015
Solution & Interoperability Test Lab Application Notes
©2015 Avaya Inc. All Rights Reserved.
8 of 25
Grandstream_SM