DataCard CD800 Quick Install Manual page 6

CLM Laminator Quick Install and Upgrade Guide
CD800 Printers with Locks:
Do one of the following:
a. Remove the reject card tray from the printer.
b. If you received a replacement reject card tray without a
tray floor, insert the new tray into your printer.
OR
a. Remove the reject card tray from the printer.
b. Use a flathead screwdriver to remove the floor of the
reject card tray. Note: The edges may be rough after
removing the tray floor.
c. Replace the reject card tray in the printer.
d. Discard the removed tray floor.
6 CLM Laminator