Controlling External Devices With The Remote Control; Setting The Remote Control Code For A Tv - Yamaha RX-V6671 Owner's Manual

MAIN MAIN ZONE 2 ZONE 2
CODE SET
CODE SET
SOURCE RECEIVER
SOURCE/RECEIVER
HDMI HDMI
1 1 2 2 3 3 4 4
5 5 V-AUX V-AUX
AV AV
1 1 2 2 3 3 4 4
5 5 6 6 AUDIO AUDIO DOCK DOCK
TUNER TUNER SIRIUS SIRIUS NET NET USB USB
CATEGORY CATEGORY
FM FM AM AM
PRESET PRESET TUN./CH TUN./CH
INFO INFO MEMORY MEMORY
SUR. DECODE STRAIGHT SUR. DECODE STRAIGHT
MOVIE MOVIE MUSIC MUSIC
SLEEP SLEEP ENHANCER ENHANCER PURE DIRECT PURE DIRECT
SCENE SCENE
CD CD RADIO RADIO
OPTION OPTION
VOLUME VOLUME
DISPLAY DISPLAY
POP-UP POP-UP
MUTE MUTE
MENU MENU
MODE MODE
HOLD HOLD
1 2 3 4
Numeric keys
5 6 7 8
9 0 10 ENT
TV
INPUT
TV operation keys
TV VOL TV CH
MUTE TV

Controlling external devices with the remote control

By setting the code for external devices (BD/DVD players, etc.),
you can operate it with the remote control of this unit.
• You cannot control an external device that does not have a remote control sensor.
• Make sure the remote control ID of the external device is set to "ID1". If any other
ID is selected, the remote control operations may not work properly.
• If the remote control is without batteries for more than 2 minutes, the registered
codes may be cleared. In this case, insert new batteries and setting the codes
again.
• When HDMI control of both this unit and playback device such as a BD/DVD
player are enabled, you may be able to control the device with the remote control
without registering the remote control code.

Setting the remote control code for a TV

By setting the remote control code for your TV, you can operate it
with the remote control of this unit.
• You can also register a remote control code of your TV to the input selection keys
(p.105). In this case, you can use the cursor keys or numeric keys to operate the
TV depending on its model. However, you need to press the corresponding input
selection key to play back TV audio on this unit.
1
Use "Remote Control Code Search" in the CD-ROM
to find a remote control code for your TV.
• If multiple remote control codes exist, first set the first code in the list, if it
does not work then try the other codes.
2
Press CODE SET using a pointed object such as the
tip of a ballpoint pen.
SOURCE/RECEIVER blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. In this case, repeat
from step 2.
3
Press TV
4
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is set successfully,
SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 2.
■
TV operations
Once you have set the remote control code for your TV, you can
control it using the TV operation keys regardless of an input source
selected on this unit.
INPUT Switches the video inputs of the TV.
MUTE Mutes the audio output of the TV.
TV operation keys TV VOL Adjust the volume of the TV.
TV CH Switch the channels of the TV
TV Turns on/off the TV.
104
En