Solid Fills Appear Mottled Or Blotchy, Blacks Appear Blue - Xerox Phaser 7760 User Manual

Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue

Problem
Solution
1.
2.
If the problem continues, adjust the toner transfer setting for the paper type being used:
1.
2.
3.
4.
Downloaded From ManualsPrinter.com Manuals
Verify that the paper you are using is the correct type for the printer. See
and Media on page 3-3.
Verify that the paper is properly loaded in the tray, and the correct paper type is selected in
the Paper Tray Setup menu. See
Load paper into Tray 1 (MPT). The control panel prompts you to change the paper type.
On the control panel, do one of the following:
■ Press the OK button to confirm the paper type. Proceed to Step 3.
■ Follow these steps:
a. Select to change the paper type, and then press the OK button.
Change
b. Scroll the correct paper type, and then press the OK button.
c.
Scroll to the correct paper size, and then press the OK button.
d. Proceed to Step 3.
Select Printer Setup , select
select
Calibrate for Paper Pages
Follow the instructions on the Calibrate for Paper Pages to adjust the toner transfer setting.
Phaser® 7760 Color Laser Printer
Loading Paper on page 3-9.
Calibration Setup , select
.
4-12
Solving Print-Quality Problems
Supported Paper
Calibrate for Paper , and then