Macintosh Os X, Version 10.2 And Higher - Xerox Phaser 7760 User Manual

Macintosh OS X, Version 10.2 and Higher

Set up your printer using Bonjour (Rendezvous), create a desktop USB connection, or use an
LPD/LPR connection for Macintosh OS X, version 10.2 and higher.
Note:
Other connection methods cause PhaserMatch color corrections to become unaccessible.
Macintosh OS X, Version 10.2 and 10.3
Bonjour (Rendezvous) Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.
2.
3.
4.
5.
6.
7.
See also:
Downloaded From ManualsPrinter.com Manuals
If you are using the PhaserMatch software, use the LPD/LPR connection method.
Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the
printer software.
When installation is complete, select one of the following options:
■ Open the Print Center utility for Mac OS X, version 10.2.x.
Open the Printer Setup Utility for Mac OS X, version 10.3.x.
■
Note: To locate utilities on the Macintosh hard drive, open the Applications folder, and
then open the Utilities folder.
Confirm that the first drop-down menu is set to Bonjour (Rendezvous).
Select the printer in the window.
Select Xerox from the list of manufacturers in the lower drop-down menu.
Select the appropriate printer model from the list of available devices.
Click the Add button.
Advanced Features Guide at
Knowledge Base at www.xerox.com/office/7760support
Phaser® 7760 Color Laser Printer
www.xerox.com/office/7760support
2-12
Installing the Printer Drivers