Xerox Phaser 7760 User Manual page 147

Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These
include safety agency examination, approval, and compliance with established environmental
standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation
of your printer.
Printer Location
Place the printer in a dust-free area within a temperature range of 50° F to 90° F (10° C to
32° C) and within the following humidity range:
■
■
Printer Clearance
Place the printer in an area where there is adequate space for ventilation, operation, and
servicing. The recommended minimal spacing is:
Overhead Clearance:
■
Total Height Requirements:
■
■
■
Total Width Requirements:
■
Other Clearances:
■
■
■
■
Downloaded From ManualsPrinter.com Manuals
Optimal Print Quality: 50% – 70%
Operating: 20% – 80%
60.96 cm (24.0 in.) above the printer
Printer: 49.3 cm (19.4 in.)
1500-Sheet Feeder: 36.4 cm (14.3 in.)
2500-Sheet High-Capacity Feeder: 36.4 cm (14.3 in.)
Finisher: 61 cm (24 in.) on the right side of the printer
42.5 cm (16.7 in.) in front of the printer
13 cm (5.3 in.) behind the printer
36.8 cm (14.5 in.) on the left side of the printer
5 cm (1.96 in.) on the right side of the printer, without the finisher
Phaser® 7760 Color Laser Printer
A-3