Parameter Db - Siemens S7-300 Operating Instructions Manual

7.5.4

Parameter DB

Task
All machine and cam data are stored in the parameter DB. These parameters can be
modified by the user program or by an operator control and monitoring system. The modified
data can be imported to the parameter assignment interface and displayed there. You can
export data displayed in the parameter assignment interface to a parameter DB.
A module may contain several parameter data sets (for example, for various recipes) that
can be selected from the program.
Configuration
CAM_P016TYPE (UDT3)
Machine data
Cam data of cams 0 to 15
CAM_P032TYPE (UDT4)
Machine data
Cam data of cams 0 to 31
CAM_P064TYPE (UDT5)
Machine data
Cam data of cams 0 to 63
CAM_P0128TYPE (UDT6)
Machine data
Cam data of cams 0 to 127
FM 352 electronic cam controller
Operating Instructions, 05/2011, A5E01071724-03
Parameter DB
Programming the FM 352
7.5 Data blocks
51