Interrupt Enable - Siemens S7-300 Operating Instructions Manual

Machine and cam data

9.13 Interrupt enable

9.13 Interrupt enable
Definition
In the cam data, you can specify whether hardware interrupts are to be generated when
cams 0 to 7 are activated and/or deactivated (see chapter "Cam data (Page 97)").
Machine data for interrupt enable in the parameter DB
Address
Absolute
3.2
Cam data for interrupt enable in the parameter DB
Address
relative
+0.4
+0.5
96
Name Type
PI_CAM BOOL
Name Type
PI_SW_ON BOOL
PI_SW_OFF BOOL
Start value
FALSE 1 = enable hardware interrupt: cam on/off
Start value
FALSE 1 = hardware interrupt on activation
FALSE 1 = hardware interrupt on deactivation
Operating Instructions, 05/2011, A5E01071724-03
Comment
Comment
FM 352 electronic cam controller