The different fluid types listed require correct selection of the relevant
temperature setting in the TEMPERATURE sub-menu of the SETTINGS menu.
Select the required temperature and press Enter to store.
The selected temperature setting will remain after power off and is indicated on
the display whilst in standby (TEMP=NORM) and also shows during manual
operation/DMX control (T=N).
TEMPERATURE Setting
HIGH
NORM
LOW
22
T e m p e r a t u r e M e n u
Approved Fog Fluid Types
Fluid Type
Pro Smoke High Density (SP mix)
i-fog
Pro Smoke Super (ZR mix)
RUSH Fog Fluid
Pro Smoke Studio (DX mix)
Pro Steam Simulation