Home >
Network
>
Technical Information for Advanced Users
Default
Reset the Network Settings to Factory Default
You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
•
This feature restores all wired (supported models only) and wireless network settings to the factory
settings.
•
You can also reset the print server to its factory default settings using BRAdmin Light or BRAdmin
Professional 3.
1. Press
[Settings] > [All Settings] > [Network] > [Network Reset].
2. [Reset Network?] will be displayed. Press [Yes].
3. [Reboot OK?] will be displayed. Press [Yes] for two seconds to confirm.
The machine will restart.
Related Information
•
Technical Information for Advanced Users
•
Transfer Your Faxes or Fax Journal Report
> Reset the Network Settings to Factory
368