Reset The Network Settings To Factory Default - Brother DCP-J1050DW Online User's Manual

Home > Network > Network Features

Reset the Network Settings to Factory Default

You can use your machine's control panel to reset the print server to its default factory settings. This resets all
information, such as the password and IP address.
• You can also reset the print server to its factory settings using Web Based Management.
>> DCP-J1050DW/MFC-J1010DW
>> DCP-J1140DW
DCP-J1050DW/MFC-J1010DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Network]. Press OK.
b. Select [Network Reset]. Press OK.
3. Press c for two seconds to confirm.
The machine restarts.
DCP-J1140DW
1. Press [Settings] > [All Settings] > [Network] > [Network Reset].
2. The reset confirmation message is displayed. Press [OK] for two seconds.
The machine will restart.
Related Information
• Network Features
Related Topics:
• Transfer Your Faxes or Fax Journal Report
> Reset the Network Settings to Factory Default
253