Brother DCP-J515W Quick Setup Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. Printer
  5. DCP-J515W
  6. Quick setup manual

Brother DCP-J515W Quick Setup Manual

Hide thumbs Also See for DCP-J515W:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Setup Guide
Start Here
Before you can use the machine, please read this Quick Setup Guide for the correct setup and installation.
WARNING
CAUTION
1
Unpack the machine and check the components
Basic User's Guide
Safety and Legal
WARNING
Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep
these bags away from babies and children.
Most of the illustrations in this Quick Setup Guide show the DCP-J515W.
a
Remove the protective tape and film covering the machine,
and also from the LCD.
b
Remove the green protective part a by lifting the front of the
machine and then pulling down on the packing part.
c
Remove the plastic bag b containing the ink cartridges from on top of
the paper tray.
d
Make sure you have all components.
Note
• The components included in the box may differ depending on your country.
• Save all packing materials and the box in case for any reason you must ship your machine.
• You need to purchase the correct interface cable for the interface you want to use (for USB or network
connection).
USB cable
Please make sure you use a USB 2.0 cable (Type A/B) that is no more than 2 metres long (cable not included).
Network cable (DCP-J715W only)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.
Warnings tell you what to do to prevent possible personal injury.
Cautions specify procedures you must follow or avoid to prevent possible minor injuries.
2
Inbox Ink Cartridges
[x4]
Installation CD-ROM
booklet
Documentation CD-ROM
DCP-J515W
DCP-J715W
Black
Yellow
Cyan
Magenta
(Approx. 65% yield of the
replacement cartridge)
For details, see
Consumable items in the
Basic User's Guide.
Power Cord
Quick Setup Guide
1
UK/IRE/GEN Version 0
1

Advertisement

Table of Contents
loading

Related Manuals for Brother DCP-J515W

Summary of Contents for Brother DCP-J515W

  • Page 1 Plastic bags are used in the packaging of your machine. To avoid danger of suffocation, please keep these bags away from babies and children.  Most of the illustrations in this Quick Setup Guide show the DCP-J515W. Remove the protective tape and film covering the machine, and also from the LCD.
  • Page 2 With both hands, gently press and slide the Load plain A4 paper paper side guides a and then the paper length guide b to fit the paper size. Make sure that the triangular marks c on the paper side guides a and paper length guide b Pull the paper tray a completely out of the line up with the mark for the paper size you are machine.

  • Page 3: Connect The Power Cord

    Close the output paper tray cover. Connect the power cord Slowly push the paper tray completely into the machine. IMPORTANT DO NOT connect the USB cable yet (if you are using a USB cable). Connect the power cord. While holding the paper tray in place, pull out the paper support a until it clicks, and then unfold the paper support flap b.

  • Page 4: Install The Ink Cartridges

    Turn the green knob on the protective yellow Install the ink cartridges cap clockwise until it clicks to release the vacuum seal, then remove the cap a. CAUTION If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. Make sure that the power is turned on.

  • Page 5: Check The Print Quality

    Gently push the ink cartridge until it clicks. After Check the print quality all the ink cartridges are installed close the ink cartridge cover. When the preparation process has finished, the LCD shows Set Paper and Press Start. Press Colour Start. Check the quality of the four colour blocks a on the sheet.

  • Page 6: Set The Date And Time

    Set the date and time Setting the date and time allows the machine to clean the print head regularly and maintain optimum print quality. It also allows the machine to name files created when using the Scan to Media feature. Press Menu.
  • Page 7 Choose your connection type For USB interface cable ® Windows , go to page 8 Macintosh, go to page 11 For Wired Network (DCP-J715W only) ® Windows , go to page 13 Macintosh, go to page 17 Note ® For Windows Server 2003/2003 x64 Edition/2003 R2/2003 R2 x64 Edition/2008/2008 R2, see the Network User’s Guide on the documentation CD-ROM.

  • Page 8: For Usb Interface Users

    ® ® • For Windows Vista and Windows 7, when If the Brother screen does not appear the User Account Control screen appears, automatically, go to My Computer (Computer), click Allow or Yes. double-click the CD-ROM icon, and then double-click start.exe.

  • Page 9: Connect The Usb Cable

    Next. The installation continues. marked with a symbol. You will find the USB socket inside the machine as shown below. DCP-J515W (DCP-J515W) DCP-J715W Carefully guide the USB cable through the trench as shown below, following the trench around and toward the back of the machine.
  • Page 10 XML Paper Specification Printer Driver The XML Paper Specification Printer Driver is the most suitable driver when printing from applications that use the XML Paper Specification documents. Please download the latest driver by accessing the Brother Solutions Center at http://solutions.brother.com/...
  • Page 11 You will find the USB socket inside the machine as shown below. DCP-J515W Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT •...
  • Page 12 Presto! PageManager (DCP-J715W only) When Presto! PageManager is installed OCR (DCP-J515W) capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. Click the Presto! PageManager icon to go to the Presto! PageManager download site, and follow the on-screen instructions.

  • Page 13: Wired Network

    Make sure that your computer is ON and you are logged on with Administrator rights. IMPORTANT • For the latest drivers and information, visit http://solutions.brother.com/ • If there are any programs running, close them. • The screens may differ depending on your operating system.
  • Page 14 CD-ROM drive. If the model name screen appears, choose your machine. If the language screen appears, choose your language. Note If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click start.exe.
  • Page 15 Wired Network ® Windows When this screen appears, choose Change The installation of the Brother drivers will the Firewall port settings to enable network automatically start. The installation screens connection and continue with the appear one after another. installation. (Recommended) and click Next.
  • Page 16 If you want to use more than 2 PCs with ScanSoft™ PaperPort™11SE installed, please Note purchase the Brother NL-5 pack which is a • If an error message appears during the multiple PC license agreement pack for up to 5 software installation, run the Installation additional users.
  • Page 17 IMPORTANT • For the latest drivers and information on the Mac OS X you are using, visit http://solutions.brother.com/ • For Mac OS X 10.4.0 to 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x. • If you have previously set up your machine...
  • Page 18 Please wait, it will take a few seconds for the software to install. After the installation, the Brother software will search for the Brother device. If the machine is configured for your network,...
  • Page 19 • If this screen appears click OK. When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. Enter a name for your Macintosh in Display Name up to 15 characters long and click OK.

  • Page 20: For Wireless Network Users

    Ethernet for a faster data transfer or USB for the fastest throughput speed. Although the Brother DCP-J715W can be used in both a wired and wireless network, only one of the connection methods can be used at a time.
  • Page 21 For Wireless Network Users Confirm your network environment (Infrastructure Mode) The following instructions will offer two methods for installing your Brother machine in a wireless network environment. If your wireless access point/router does not support Wi-Fi Protected Setup (WPS) or AOSS™, write down the wireless network settings of your wireless access point/router in the area below.

  • Page 22: Connecting The Brother Machine To The Wireless Network

    For Wireless Network Users Connecting the Brother machine to the wireless network Configure the wireless Your machine will now try to connect to your wireless network using the information you settings (typical Wireless have entered. Setup in infrastructure It may take a few minutes to connect to your mode) wireless network.
  • Page 23 LCD will show the wireless signal strength of your access point/router. To install MFL-Pro Suite, continue to step 12. Place the Brother machine within range of your Wi-Fi Protected Setup or AOSS™ access ® For Windows Users: point/router. The range may differ depending on your environment.

  • Page 24: Troubleshooting

    Press a or b to choose WLAN Enable (For DCP-J515W) or Network I/F (For DCP-J715W) and press OK. Press a or b to choose On (For DCP-J515W) or WLAN (For DCP-J715W) and press OK. Press Stop/Exit. The wireless access point/router cannot be detected.
  • Page 25 The security information (SSID/Network Key) is incorrect. Reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother TS-05 machine supports the use of the first WEP key only.

  • Page 26: Wireless Network

    ® ® • For Windows Vista and Windows 7, when If the Brother screen does not appear the User Account Control screen appears, automatically, go to My Computer (Computer), click Allow or Yes. double-click the CD-ROM icon, and then double-click start.exe.
  • Page 27 Choose Wireless Network Connection, and Choose your machine from the list, and then then click Next. click Next. (DCP-J515W) Note • If your wireless settings fail, the Wireless Device Setup Wizard will appear during the installation of MFL-Pro Suite. Confirm your settings by following the on-screen instructions.
  • Page 28 Wireless Network ® Windows The installation of the Brother drivers will Finish and restart automatically start. The installation screens appear one after another. IMPORTANT Click Finish to restart your computer. After DO NOT cancel any of the screens during the restarting the computer, you must be logged on installation.
  • Page 29 PaperPort™11SE on up to 2 PCs on the network. If you want to use more than 2 PCs with ScanSoft™ PaperPort™11SE installed, please purchase the Brother NL-5 pack which is a multiple PC license agreement pack for up to 5 additional users. To purchase the NL-5 pack, contact your authorized Brother dealer or contact Brother customer service.
  • Page 30 (DCP-J715W) Put the supplied installation CD-ROM into your CD-ROM drive. The Brother software will search for the Brother device in your wireless network. If the machine Double-click the Start Here OSX icon to install. is configured for your network, choose the device you want to install, and then click Next.
  • Page 31 Choose your machine from the list, and then click OK. When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. Click the Presto! PageManager icon to go to the Presto! PageManager download site, and follow the on-screen instructions.

  • Page 32: Install Optional Applications

    Install Optional Applications ® Windows Install FaceFilter Install FaceFilter Studio Studio/BookScan & Help Whiteboard Suite supported by Reallusion, To get instructions on how to use FaceFilter Studio, download and install FaceFilter Studio Help. FaceFilter Studio is an easy-to-use borderless photo To run FaceFilter Studio, go to printing application.

  • Page 33: For Network Users

    For Network Users Restore the network settings to factory default To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below. Make sure the machine is not operating, then disconnect all the cables from the machine (except the power cord).

  • Page 34: Replacement Consumables

    The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

This manual is also suitable for:

Dcp-j715w

Table of Contents