Table of Contents
Advertisement
#use_telnet_login
Enables or disables login credentials when starting a Telnet session.
Syntax
#use_telnet_login state
Parameters
state
Type: INTEGER
Accepts a number, from table below, corresponding to the desired state.
state
0
1
Example
#use_telnet_login 0
USE_TELNET_LOGIN 0
Related Commands
#get_telnet_access
#get_telnet_port
#get_telnet_welcome
#set_telnet_access
#set_telnet_port
#set_telnet_welcome
Description
Disable Telnet login
Enable Telnet login
page | 101
Commands
Advertisement
Table of Contents
