HIKVISION DS-9608NI-ST Quick Start Manual page 9

Quick Start Guide of Network Video Recorder
4. Connect the power cable to the HDD.
5. Re-install the cover of the NVR and fasten screws.
Steps (for DS-7600NI-ST/SP and DS-7700NI-ST/SP):
1.
Remove the cover from the NVR by unfastening the screws on the rear and side panel.
2. Connect one end of the data cable to the motherboard of NVR and the other end to the HDD.
3. Connect the power cable to the HDD.
8