HIKVISION DS-9608NI-ST Quick Start Manual page 12

Quick Start Guide of Network Video Recorder
No. Name
2 IR Receiver
Front Panel Lock
3
(for DS-9600NI-ST/RT/XT series)
4 DVD-R/W
5 Alphanumeric Buttons
6 USB Interfaces
Composite
7
Keys
MAIN/SPOT/ZOO
Function Description
Guard LED turns blue when the device is in armed status; at this
time, an alarm is enabled when an event is detected.
GUARD
The LED turns off when the device is unarmed. The arm/disarm
status can be changed by pressing and holding on the ESC
button for more than 3 seconds in live view mode.
Receiver for IR remote
You can lock or unlock the panel by the key.
Slot for DVD-R/W.
Switch to the corresponding channel in Live view or PTZ
Control mode.
Input numbers and characters in Edit mode.
Switch between different channels in Playback mode.
The light of the button is blue when the corresponding channel is
recording; it is red when the channel is in network transmission
status; it is pink when the channel is recording and transmitting.
Universal Serial Bus (USB) ports for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
Back to the previous menu.
ESC
Press for Arming/disarming the device in Live View mode.
Enter the Manual Record setting menu.
In PTZ control settings, press the button and then you can call a
REC/SHOT
PTZ preset by pressing Numeric button.
It is also used to turn audio on/off in the Playback mode.
The button is used to enter the Playback mode.
PLAY/AUTO
It is also used to auto scan in the PTZ Control menu.
ZOOM+ Zoom in the PTZ camera in the PTZ Control setting.
Adjust focus in the PTZ Control menu.
A/FOCUS+
It is also used to switch between input methods (upper and
lowercase alphabet, symbols and numeric input).
Edit text fields. When editing text fields, it will also function as
a Backspace button to delete the character in front of the cursor.
On checkbox fields, pressing the button will tick the checkbox.
In PTZ Control mode, the button adjusts the iris of the camera.
EDIT/IRIS+
In Playback mode, it can be used to generate video clips for
backup.
Enter/exit the folder of USB device and eSATA HDD.
Switch between main and spot output.
M-
In PTZ Control mode, it can be used to zoom out the image.
Select all items on the list when used in a list field.
In PTZ Control mode, it will turn on/off PTZ light (if
F1/ LIGHT applicable).
In Playback mode, it is used to switch between play and reverse
play.
Cycle through tab pages.
F2/ AUX
In synchronous playback mode, it is used to switch between
11