Recording; Instant Recording; All-Day Recording; Playback - HIKVISION DS-9608NI-ST Quick Start Manual

Quick Start Guide of Network Video Recorder
5. When the array configuration is completed, click OK button in the pop-up message box to finish the settings.

Recording

Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You may refer to
the user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record.
And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.

Instant Recording

On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the
window when you click on it.
Click the icon to enable the record, and the icon turns to
then the icon turns to

All-day Recording

Steps:
1. On the live view window, right lick the window and move the cursor to the Start Recording option, and
select Continuous Record or Motion Detection Record on your demand.
2. And click the Yes button in the popup Attention message box to confirm the settings.
Then all the channels will start to record in the selected mode.

Playback

Play back the record files of a specific channel in the live view menu. Channel switch is supported.
 Option 1:
Choose a channel under live view using the mouse and click the
Only record files recorded during the past five minutes on this channel will be played back.
.
. And click
button in the shortcut operation menu.
41
icon to disable the record,