Recording - HIKVISION DS-9608NI-ST Quick Start Manual

Quick Start Guide of Network Video Recorder
The live view interface may differ according to different models.
Interface Introduction
No. Name
1 Channel List
Live View Window
2
Play Control Bar
3
PTZ Control
4
Starting Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the
Refer to the following table for the description of buttons on the live view window:
Icon Description
Select the window-division mode
Start/Stop all live view
/
Capture pictures in the live view mode
Start/Stop all recording
/
Previous/Next page
/
Select different stream type for live
view by clicking the icon
: live view in main stream;
: live view in sub stream;
:live view in transcoded stream.

Recording

Before you start
Make sure the device is connected with HDD or network disk, and the HDD or network disk has been initialized
for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section introduces the
configuration of scheduled recording.
Description
Displays the list of channels and the playing and recording status of each
channel.
Displays the image of channel, and multi-window division is supported.
Play control operations are supported.
Pan, tilt, zoom operations are supported, as well as preset editing and
calling.
PTZ function can only be realized if the connected camera supports PTZ control.
button on the toolbar to start the live view of all cameras on the device list.
32
Icon Description
Open/Close audio
/
Start/Stop two-way Audio
/
Adjust volume
Enable/Disable digital zoom
/
Full screen