Serial Port; Rear Panel Connectors; Dvi Input Adapter Cables - AMX TPI-PRO-DVI-2 Instruction Manual

SERIAL Port

The SERIAL (DB-9) port can be used for direct Serial (RS-232) configuration (FIG. 9).
SERIAL (DB-9) Port
FIG. 9
SERIAL Port - Pinouts and Signals
Pin Signal
1 DCD - Data Carrier Detect
2 RXD - Receive Data
3 TXD - Transmit Data
4 DTR - Data Terminal Ready
5 Ground
6 DSR - Data Set Ready
7 RTS - Request to Send
8 CTS - Clear to Send
9 RI - Ring Indicator
See the Terminal/Telnet Commands section on page 132 for a listing of supported Terminal/Telnet commands.

Rear Panel Connectors

DVI Input Adapter Cables

In order to connect non-DVI input source devices (S-Video, Composite, VGA and Component) to the DVI Input connectors, the
following (optional) adapter cables are required:
DVI Input Adapter Cables
Name
• CC-DVI-DVI
• CC-DVI-5BNCM
• CC-DVI-RCA3M
• CC-DVI-SVID
• CC-DVIM-VGAF
NOTE: The TPI and the adapter cables listed above utilize industry-standard pinouts. The only adapter cable that is unique to AMX is
the CC-DVI-SVID (DVI-to-S-Video) cable. The others are generally available to purchase from other vendors, assuming that they also
utilize industry standard (or equivalent) pinouts.
Refer to the Cable Details and Pinout Information section on page 18 for cable details and pinout information for each cable type:
DVI-D Male to DVI-D Male Single-Link Cable section on page 19

DVI-A Male to 5-BNC Male Cable section on page 20

DVI-A Male to Triple RCA Male Cable section on page 21

DVI-A Male to S-Video Male Cable section on page 22

DVI-A Male to HD15 (VGA) Male Cable section on page 23

TPI-PRO-DVI - Instruction Manual
Description
DVI-to-DVI
DVI-to-5 BNC Male
DVI-to-3 RCA Male
Note: Used for Component and Composite inputs
DVI-to-S-Video
DVI-to-VGA (up to 1920x1200)
Note: Standard DVI-to-VGA adapters can be used for DVI-to-VGA. These adapters are
common and widely available.
SERIAL (DB-9) Input port
1 2 3 4 5
6 7 8 9
Wiring and Device Connections
Length FG#
9' (2.743m) FG10-2170-06
6' (1.828m) FG10-2170-08
6' (1.828m) FG10-2170-09
9' (2.743m) FG10-2170-10
6' (1.828m) FG10-2170-13
26