Ores; Pkeyp; Pkp - AMX TPI-PRO-DVI-2 Instruction Manual

Run Time Operation Commands (Cont.)

ORES

PKEYP

@PKP

TPI-PRO-DVI - Instruction Manual
Changes the output resolution at run time. The description is optional and is used for certain resolutions. Standard output
modes are:
Horizontal Vertical Refresh Description
640 480 60
640 480 72
640 480 75
800 600 60
800 600 72
800 600 75
848 480 60
1024 768 60
1024 768 70
1024 768 75
1280 720 60
1280 768 60
1280 800 60
1280 1024 60
1280 1024 75
1360 768 60
1440 900 60
1680 1050 60
1600 1200 60
1920 1080 60
1920 1200 60
Additional output modes for TPI-PRO-DVI are:
Horizontal Vertical Refresh Description
720 480 60
1280 720 60
1920 1080 60
720 576 50
1280 720 50
1920 1080 50
Additional output modes can be sent, and if a standard does not match, then VESA CVT timings will be calculated for the
output timings.
The CVT timings are standard blanking if the pixel clock is within allowable limits, otherwise CVT reduced blanking (rb)
timings are employed.
Example:
SEND_COMMAND Panel,"'ORES-1920x1200@60 VESA rb'"
The output resolution will be changed to 1920x1200@60 using VESA reduced blanking timings.
SEND_COMMAND Panel,"'ORES-1280x1024@60'"
The output resolution will be changed to 1280x1024@60.
SEND_COMMAND Panel,"'ORES-1920x1080@50 CEA'"
The output resolution will be changed to 1920x1080@50 using CEA timings.
SEND_COMMAND Panel,"'ORES-1400x1050@60'"
The output resolution will be changed to 1400x1050@60 using calculated VESA CVT timings.
Pops up the keypad icon and initializes the text string to that specified. Keypad displays a '*' instead of the numbers typed.
The Prompt Text is optional.
Syntax:
"'PKEYP-<initial text>'"
Variables:
initial text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'PKEYP-123456789'"
Pops up the Keypad and initializes the text string '123456789' in '*'.
Pops up the keypad icon and initializes the text string to that specified. Keypad displays a '*' instead of the numbers typed.
The Prompt Text is optional.
Syntax:
"'@PKP-<initial text>;<prompt text>'"
Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
Example:
SEND COMMAND Panel,"'@PKP-1234567;ENTER PASSWORD'"
Pops up the Keypad and initializes the text string 'ENTER PASSWORD' in '*'.
Command
'ORES-640x480@60'
'ORES-640x480@72'
'ORES-640x480@75'
'ORES-800x600@60'
'ORES-800x600@72'
'ORES-800x600@75'
'ORES-848x480@60'
'ORES-1024x768@60'
'ORES-1024x768@70'
'ORES-1024x768@75'
VESA 'ORES-1280x720@60 VESA'
'ORES-1280x768@60'
'ORES-1280x800@60'
(default) 'ORES-1280x1024@60'
'ORES-1280x1024@75'
'ORES-1360x768@60'
'ORES-1440x900@60'
'ORES-1680x1050@60'
'ORES-1600x1200@60'
VESA rb 'ORES-1920x1080@60 VESA rb'
VESA rb 'ORES-1920x1200@60 VESA rb'
Command
CEA 'ORES-720x480@60 CEA'
CEA 'ORES-1280x720@60 CEA'
CEA 'ORES-1920x1080@60 CEA'
CEA 'ORES-720x576@50 CEA'
CEA 'ORES-1280x720@50 CEA'
CEA 'ORES-1920x1080@50 CEA'
NetLinx Programming
109