Example: Counter Start Source = Off; Example: Counter Start Source = Counterend (Itself) - Teledyne TS-M4096 User Manual

Example: Counter Start Source = OFF

 The counter starts on the counterReset Cmd.
 The counter continues unless a new counterReset Cmd is received, which then restarts the
counter at 00.
 When Counter Reset Source= 'Event' or 'CounterEnd' the counter is reset to 00 but does
not restart counting, until the next CounterReset Cmd.

Example: Counter Start Source = CounterEnd (itself)

 Counter starts when Counter Mode is set to Active.
 A Counter Reset CMD will reset the counter to 00 and it then continues counting.
 counterResetSource must be set to CounterEnd. When the counterValue feature reaches
the counterDuration value an event is generated and the counter is reset to 00, then continues.
Genie_TS_Series GigE Vision Camera
Operational Reference  77